Double tap to zoom

 

Features

  • Maximum visibility from the cab
  • Easy-to-use quick coupler
  • Excellent parallel kinematics
  • 2 doors
  • Comfortable cab with responsive steering
  • Easy-handling joystick with third and fourth control circuit in one hand
  • YANMAR Smart Control (TSC)
  • Excellent service access
  • Central pivot with floating axle, the same as on larger wheel loaders
  • Automatic self-locking differentials in both axles

Specifications

OPERATING DATA, STANDARD EQUIPMENT  
Operating weight (SAE J 1197) 15,432 lbs (7,000 kg)
Tipping load, straight at full reach (ISO 14397-1) 11,023 lbs (5,000 kg)
Tipping load, articulated at full reach (ISO 14397-1) 9,700 lbs (4,400 kg)
Total length, bucket on ground 17' 11" (5,480 mm)
Total width 6' 11" (2,100 mm)
Turning radius at outside bucket edge 15' 4" (4,680 mm)
Wheelbase 7' 6" (2,290 mm)
Total height (top of cab) 9' 1" (2,780 mm)
ENGINE 
Manufacturer, model Deutz, TCD3.6 L4
Type 4-cylinder turbo diesel engine with intercooler, EPA Tier 4 Final / EC Stage IV
Combustion 4-stroke cycle, Common Rail injection
Displacement 220 in3 (3,600 cm3)
Net power rating at 2,200 rpm (SAE J 1349) (100 hp) 74.4 kW
Cooling system Water
ELECTRICAL SYSTEM 
Nominal voltage 12 V
Battery 12 V / 135 Ah
Generator 14 V / 95 A
Starter 12 V / 3.5 hp (2.6 kW)
Cold-starting aid Glow plugs
Lighting system in compliance with US/ISO standards, H7 headlamps. 
POWER TRANSMISSION 
Hydrostatic drive, closed circuit, independent from loader hydraulics. Perfected driving automatics,
automatic optimisation and adjustment of drawbar pull and speed. Hydraulic motor power shift
providing two speed ranges. Infinitely variable speed control forward and reverse. 4-wheel drive
from reduction gear on rear axle via cardan shaft to front axle. Inching pedal for sensitive
driving and stopping at high rpm.
4 speeds:
“Low” 0-3.7 / 0-11.8 mph (0-6 / 0-19 kph)
“High” 0-6.8 / 0-22 mph (0-12 / (0-36 kph)
AXLES 
Rigid front axle with 45% limited slip differential. Oscillating rear axle with 45%
limited slip differential. Center-mounted disc brake.
TIRES 
Standard 405/70 R 20 SPT 9 Dunlop
BRAKES 
Service brake: Hydraulically actuated center-mounted drum brake,
acting on all 4 wheels via 4-wheel drive.
Auxiliary brake: Hydrostatic through closed-circuit travel drive.
Parking brake: Mechanically actuated center-mounted drum brake on front axle.
STEERING 
Articulated, 2 steering cylinders with final positioning damping on both sides, fully hydraulic through
Load-Sensing priority valve, quick and easy steering even at engine idle-running speed.
Total steering angle 80 deg.
FLUID CAPACITIES 
Fuel tank 29 gal (110 l)
Hydraulic system (incl. tank) 25 gal (93 l)
Ad Blue Tank 2.6 gal (10 l)
Engine coolant 3.9 gal (15 l)
Engine oil 2 gal (8 l)
HYDRAULIC SYSTEM 
Pump capacity 20 gpm (78 l/min)
Working pressure 3,625 psi (250 bar)
Control unit: Proportional hydraulic valve with 3 control circuits and high-speed control for tilting.
Simultaneous, independent control of all movements. Single, four-way control lever
(multi-function lever) for tilt and lift cylinder with integrated travel direction selector switch and
switch for additional control circuit. Float position in control circuit "Lowering", electro-hydraulically
operated. Additional control circuit including quick couplers and continuous operation function provided as standard.
Hydraulic cylinders: 1 lifting cylinder, 1 tilt cylinder, all dual-action
The thermostatically controlled oil circuit ensures that the oil temperature is promptly reached and
avoids overheating. Return filter installed in hydraulic tank allows for eco-friendly replacement of filter elements
Fingertip control for 3rd control circuit, electro-proportional, oil flow limitation via machine function
display, continuous operation. Installation on loader frame incl. couplings.
Hydraulically switchable float position by overdriving the pressure point “Lower” on the joystick,
electrically switchable continuous operation function.
Single, four-way control lever (joystick) with integrated direction-of-travel switch and switch for additional control circuit.
LOADER FRAME 
Loader installation featuring true parallel linkage and hydraulic quick coupler.
General-purpose bucket (SAE J 742) 1.57 yd3 (1.20 m3)
Lift capacity at ground level (SAE J 732) 15,962 lbf (71,000 N)
Lift capacity at ground level (SAE J 732) 13,264 lbf (59,000 N)
FORK LIFT ATTACHMENT 
Operating load (SAE J 1197), over the total lift and steering range 1.57 yd3 (1.20 m3)
Operating load in transport position, above ground level, total steering range 4,948 lbs (2,244 kg)*
Width of fork carrier 49" (1,240 mm)
Length fork tines 5.5" x 2" (140 mm x 50 mm) 44" (1,120 mm)
Stability factor on level and solid ground 2
Operating load determined on level ground = 80 % of tipping load, articulated
CAB 
Rubber-mounted full-vision steel cab, ROPS (EN ISO 3471) and FOPS** (EN ISO 3449) certified.
Cab featuring two doors, intermittent wipers and washer (front and rear), tinted panoramic safety
glass, sliding window on left-hand side.
Driver's seat MSG85 (standard version) with hydraulic cushioning and lap belt, weight-adjustable,
in compliance with ISO 7096 and ISO 6683.
Cab heating with 3-speed heater fan (choice fresh air/recirculating air) and windshield defroster,
front and rear.
Standard: Air conditioning. Back-up alarm for reverse travel. Battery disconnector. Guard for V-belt.
Immobilizer, electronic, keypad operation. 2 working floodlights, front. 2 working floodlight, rear.
Rear axle weights, approx. 660 lbs (300 kg). Steering wheel with height and tilt adjustment.
Cab exterior noise level 101 dB (A)
Cab interior noise level 74 dB (A)
Noise level values measured in compliance with Directive 2000/14/EC and EN474.
*With rear axle weights
**FOPS-approved only with skylight guard (optional)