Virnig URG72-UT

Double tap to zoom

 

Features

  • Unique design allows efficient forward and reverse operation to drag loose material into piles.
  • NitroSteel® cylinder rods and Teflon® coated bushings on all pivots.
  • 44” grapple jaw opening to haul large amounts of brush per load.
  • Heavy-duty jaw and rake tines constructed from 3/8″ Grade 50 steel.
  • Replaceable cast teeth.
  • Possible clearance issue with URG-UT on Takeuchi® TL12 and John Deere® 330G, 331G, 332G, 333G.

Specifications

MODEL URG72-UT
Overall Width (Inches) 73.5
Height: Overall / Bucket (Inches) 34.2 / 29.3
Overall Depth (Inches) 22.1
Number of Teeth 7
Space Between Teeth (Inches) 10.2
Space Between Tines / Grapple Jaws (Inches) 5.0 / 11.1
Tine Thickness (Inches) 0.375*
Cylinder Bore / Stroke (Inches) 2.0 / 8.375
Cylinder Pins / Hinge Pins Diameter (Inches) 1.25 / 1.563
Grapple Jaw Opening (Inches) 44.1
Approximate Weight (Pounds) 695
Recommended Loader Capacity Less than 2200 pounds
*Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength).