Double tap to zoom

 

Features

DIRECT DRIVE MOTOR
One standard flow and three high flow USA made Eaton® motor configurations ensure optimum performance and longevity.

PRESSURE RELIEF VALVES
Dual pressure relief valves protect the motor and the loader’s hydraulic system from
damaging pressure spikes.

DYNAMIC BRAKING
Stops the 550-610 lb flywheel in under 15 seconds.

FOUR FLAT BLADES
5/8” x 5” double-sided flat blades can be flipped to utilize second sharpened edges. Blades mounted to a large circular flywheel, ensure the flywheel bounces off stumps rather than catching and damaging components.

23″ TALL PUSH BAR
Push bar at the front provides rigidity and helps push over thick brush and trees.

REPLACEABLE SKID SHOES
Adds deck strength and provides longer wear life.

DO NOT OPERATE CUTTER WITHOUT A SHATTERPROOF CAB ON LOADER.

Specifications

MODEL IRC84
Cut Width (Inches) 84.0
Overall Width (Inches) 90.0
Overall Height (Inches) 20.1
Overall Depth (Inches) 92.3
Deck Height (Inches) 8.3
Push Bar Height (Inches) 23.4
Cut Height (Inches) 2.3
Cutting Capacity, Diameter (Inches) 8.0
Deck Thickness: Top / Side (Inches) 0.25*
Recommended Flow Rate (GPM) 20-25 Standard Flow, 25-45 High Flow
Approximate Weight (Pounds) 2420**
Recommended Loader Capacity Greater than 2200 pounds

*Deck Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength).
**High Flow motor options add approximately 70 pounds to model weight.