Salford Group 30' TOOLBAR SINGLE MOUNTED TANK

Double tap to zoom

APPROX. MINIMUM HORSEPOWER REQUIRED IS 200 TO 240 HP - DEPENDING ON CONFIGURATION
REQUIRES MINIMUM OF 3 HYDRAULIC CIRCUITS
FAN REQUIRES 21 GPM @ 2800 PSI ON CLOSED CENTER HYDRAULICS
BUSHEL CAPACITY OF TANK IS CALCULATED BY VOLUME; ACTUAL CAPACITY MAY VARY BY COMMODITY TYPE

30' TOOLBAR STANDARD FEATURES - SINGLE MOUNTED TANK

REAR TOOLBAR:
- 500 SERIES DOUBLE DISC OPENERS ON 7 1/2" SPACING
- 48 OPENERS TOTAL
AXLES:
- MAINFRAME - 19.0/45-17 TIRES / 8-BOLT HUBS / WALKING TANDEMS & CASTERS
- WINGS - 31.5 x 13.5L x 15 TIRES ON 6-BOLT HUBS / WALKING TANDEMS & CASTERS
- AIR SYSTEM FOR REAR TOOLBAR:
AIR SYSTEM FOR REAR TOOLBAR:
- 6-TOWERS WITH 8-OUTLETS
- 2 1/2" PRIMARY LINES TO TOWERS / 1" SECONDARY LINES TO ROW UNITS
- POLYURETHANE PRIMARY LINES
UNITS SHIPPED AS FULL KNOCKDOWN OR PARTIAL ASSY AS TRUCKING WIDTH PERMITS
- APPROX. WEIGHT WITH MOUNTED TANK - 21,300 LBS
- TRANSPORT WIDTH - 14'11"
- TRANSPORT HEIGHT - 13'10"

AVAILABLE 30' FRONT TOOLBAR OPTIONS - SINGLE MOUNTED TANK

AVAILABLE MOUNTED TANK CONFIGURATIONS - SINGLE MOUNTED TANK

OPTION 1- SINGLE MOUNTED TANK / 6-OUTLET / GROUND DRIVE METER / 180 OR 140 BU
- FAN: 17" S3 FAN W/ 16 CC MOTOR (SEE HYDRAULIC REQUIREMENTS
- METER DRIVES: ZEROMAX INFINITELY ADJUSTABLE GROUND DRIVE
- METER ROLLERS: 1/2" PLASTIC PEGGED ROLLERS
- METERBOXES: 6-OUTLET STAINLESS STEEL FOR 2 1/2" LINES
- TANKS: POLYMER TANK WITH STAINLESS STEEL INNER COMPONENTS
- HOSE: 2 1/2" STAINLESS STEEL RIGID AND POLYURETHANE FLEX HOSE
- AXLE: 28L x 26 DIAMOND TREAD TIRES ON 10-BOLT HUBS
- ELECTRONICS: DICKEY-JOHN INTELLI-AG IOSbus* CONTROL SYSTEM
- Includes: Fan Speed Sensor, Meter Shaft Encoder, Bin Level Sensor, Bin Pressure Sensor, On-board ECU, Single Blocakge Sensor per Tower, Required ISObus* Harness to Tractor (Virtual terminal not included)
OPTION 2 - SINGLE MOUNTED TANK / 6-OUTLET / HYD VARIABLE RATE / 180 OR 140 BU

FAN: 17" S3 FAN W/ 16 CC MOTOR (SEE HYDRAULIC REQUIREMENTS
METER DRIVES: DICKEY-JOHN HYDRA-DRIVE HYD VARIABLE RATE
METER ROLLERS: 1/2" PLASTIC PEGGED ROLLERS
METERBOXES: 6-OUTLET STAINLESS STEEL FOR 2 1/2" LINES
TANKS: POLYMER TANK WITH STAINLESS STEEL INNER COMPONENTS
HOSE: 2 1/2" STAINLESS STEEL RIGID AND POLYURETHANE FLEX HOSE
AXLE: 28L x 26 DIAMOND TREAD TIRES ON 10-BOLT HUBS
ELECTRONICS: DICKEY-JOHN INTELLI-AG IOSbus* CONTROL SYSTEM
Includes: Fan Speed Sensor, Meter Shaft Encoder, Bin Level Sensor, Bin Pressure Sensor, On-board ECU, Single Blocakge Sensor per Tower, Required ISObus* Harness to Tractor (Virtual terminal not included)

OTHER OPTIONS - SINGLE MOUNTED TANK