30' TOOLBAR STANDARD FEATURES - DOUBLE MOUNTED TANK

• REAR TOOLBAR:
  • 500 SERIES DOUBLE DISC OPENERS ON 7 1/2" SPACING
  • 48 OPENERS TOTAL
• AXLES:
  • MAINFRAME - 19.0/45-17 TIRES / 8-BOLT HUBS / WALKING TANDEMS & CASTERS
  • WINGS - 31.5 x 13.5L x 15 TIRES ON 6-BOLT HUBS / WALKING TANDEMS & CASTERS
  • AIR SYSTEM FOR REAR TOOLBAR:
• AIR SYSTEM FOR REAR TOOLBAR:
  • 6-TOWERS WITH 8-OUTLETS
  • 2 1/2" PRIMARY LINES TO TOWERS / 1" SECONDARY LINES TO ROW UNITS
  • POLYURETHANE PRIMARY LINES
• UNITS SHIPPED AS FULL KNOCK DOWN OR PARTIAL ASSY AS TRUCKING WIDTH PERMITS
  • APPROX. WEIGHT WITH MOUNTED TANK - 21,300 LBS
  • TRANSPORT WIDTH - 14'11"
  • TRANSPORT HEIGHT - 13'10"

AVAILABLE 30' FRONT TOOLBAR OPTIONS - DOUBLE MOUNTED TANK

OPTION 1 - NO FRONT TOOLBAR ATTACHMENTS

OPTION 2 - 7.5" SP. NO-TILL COULTERS (48 COULTERS)

OPTION 3 - 15" SP. (MID-ROW) NO-TILL COULTER W/ FERTILIZER BOOT ATTACHMENT (includes 6 tower air system with 1 1/4" lines to row units, 2 1/2" polyurethane primary lines)

OPTION 4 - 15" SP. (MID-ROW) 500 SERIES OPENERS FOR FERTLIZER (includes 6 tower air system with 1 1/4" lines to row units, 2 1/2" polyurethane primary lines)

AVAILABLE MOUNTED TANK CONFIGURATIONS - - DOUBLE MOUNTED TANK

• OPTION 1 - DOUBLE MOUNTED TANK / 6-OUTLET / GRD DRIVEN METERING / 320 or 280 BU
  • FAN: 17" S3 FAN W/ 16 CC MOTOR (SEE HYDRAULIC REQUIREMENTS)

  • METER DRIVES: ZEROMAX INFINITELY ADJUSTABLE GROUND DRIVE

  • METER ROLLERS: 1/2" PLASTIC PEGGED ROLLERS

  • METERBOXES: 6-OUTLET STAINLESS STEEL FOR 2 1/2" LINES

  • TANKS: POLYMER TANK WITH STAINLESS STEEL INNER COMPONENTS

  • HOSE: 2 1/2" STAINLESS STEEL RIGID AND POLYURETHANE FLEX HOSE

  • AXLE: 28L x 26 DIAMOND TREAD TIRES ON 10-BOLT HUBS

  • ELECTRONICS:  DICKEY-JOHN INTELLI-AG IOSbus* CONTROL SYSTEM

  • Includes: Fan Speed Sensor, Meter Shaft Encoders, Bin Level Sensors, Bin Pressure Sensors, On-board ECU, Single Blocakge Sensor per Tower Required ISObus* Harness to Tractor (Virtual terminal not included)

• OPTION 2 - DOUBLE MOUNTED TANK / 6-OUTLET / HYD VARIABLE RATE / 320 OR 280 BU
  • FAN: 17" S3 FAN W/ 16 CC MOTOR (SEE HYDRAULIC REQUIREMENTS)

  • METER DRIVES: DICKEY-JOHN HYDRA-DRIVE HYD VARIABLE RATE

  • METER ROLLERS: 1/2" PLASTIC PEGGED ROLLERS

  • METERBOXES: 6-OUTLET STAINLESS STEEL FOR 2 1/2" LINES

  • TANKS: POLYMER TANK WITH STAINLESS STEEL INNER COMPONENTS

  • HOSE: 2 1/2" STAINLESS STEEL RIGID AND POLYURETHANE FLEX HOSE

  • AXLE: 28L x 26 DIAMOND TREAD TIRES ON 10-BOLT HUBS

  • ELECTRONICS:  DICKEY-JOHN INTELLI-AG IOSbus* CONTROL SYSTEM

  • Includes: Fan Speed Sensor, Meter Shaft Encoders, Bin Level Sensors, Bin Pressure Sensors, On-board ECU, Single Blocakge Sensor per Tower Required ISObus* Harness to Tractor (Virtual terminal not included)

OTHER OPTIONS - DOUBLE MOUNTED TANK

• DOUBLE SHOOT (ON REAR TANK ONLY)
• DIGI-STAR SCALE KIT WITH CAB READOUT
• DIGI-STAR SCALE-LINK ISObus SCALE KIT (SEE ABOVE NOTE ON ISObus)
• TOW-BEHIND CART HITCH (INCLUDES ONE PAIR OF HYD LINES)
• PIONEER COUPLER KIT (1/2" REAR REMOTE LINES)
• DEDUCT ELECTRONIC CONTROLS