Features
Features | Benefits |
Tractor HP Range | Designed for 75-150 HP tractor with minimum weight of 7,000 lbs. |
Gearbox HP Rating | 150 HP |
3 Point Design | Does not require a dedicated tractor. Three point hook up is easy to hook up and remove from tractor. |
Cutter Deck Visibility | Visibility of the cutter deck is captured from the operator’s seat. Easy to see operation. Operator does not have to look behind. |
Factory Assembled | Arrives ready for the customer, saves time and money. (Excluding gauge wheel options and fluids.) |
Grease Ports | All grease ports are easily accessible for servicing. |
10' Transport Width | Folds up close to the tractor. No weight brackets or decks hanging away from the tractor. Typically, not much wider than the tractor, which means safer transporting. |
Extension Arm Design | One cylinder used to adjust extension arm horizontally 32" is easy to operate. |
Long Horizontal Reach | Good access for reaching vegetation far away from the tractor. |
Above Grade Vertical Reach | Good access for reaching up embankments and cutting low over hanging limbs. |
Below Grade Reach | Good access for reaching down embankments. |
175 Degree Deck Rotation Angle | Cutter head can be positioned to reach different angles. |
Cat. 2 & Cat. 3 with Quick Hitch 540 rpm or 1000 rpm |
Fits a wide variety of tractors. |
35 Gallon Oil Reservoir | Large reservoir maintains optimum fluid temperatures and also serves as counterweight. |
1" Cutting Capacity | Good for trimming brush. |
High Blade Tip Speed | 15,600 FPM tip speed means cleaner cutting. |
One Parking Stand | Easy to adjust 3-point hitch level for unhooking tractor. |
In-line Filter | Cleans hydraulic fluid before it re-enters the reservoir. |
Shut-off Valve | Permits maintenance with minimum oil loss. |
Built-in Auxiliary Weight Rack on Left Side |
Suitcase weights can be added to left side for balance. Able to choose the weight bracket to match various types of suitcase weights. |
Oil Pressure Gauge | Easily monitor oil pressure for optimum performance of unit. |
Pressure Relief Valve | Protects against high hydraulic fluid pressure. |
Gauge Wheels Option | Deck floats on gauge wheels eliminating frequent deck positioning and vigilant watch for changes in ground contour under the tractor and/or deck. |
SMV Mounting Socket (Standard) SMV Sign (Accessory) |
SMV mounting socket receives most SMV signs equipped with a mounting blade for ease of attachment and removal when transporting on a truck or trailer. SMV sign is offered as an accessory when the tractor’s SMV sign and mounting blade does not fit the cutter’s standard SMV mounting socket. |
Specifications
Specifications & Capacities | DBM2660 |
Tractor horsepower | 75 Minimum hp. |
Minimum tractor lift capacity | 2,500 lbs |
Minimum tractor weight | 7,000 lbs without added weights |
Weight | 1,792 lbs (With front & rear chain guards, side gauge wheel, Ditch Bank mounted speed increaser, & Case weight hanger. Without fluid in reservoir) |
Hitch type | Cat. ll or Cat. ll/lll Quick Hitch. Clevis style lower hitch. |
Tractor power take-off speed | DB2660 = 540 rpm; DBM2660 = 1000 rpm |
Cutting width | 58" |
Transport width, minimum | 10' - 1" (without gauge wheels) |
Overall width (fully retracted with optional weight bracket) |
10' - 3 3/4" |
Minimum cutting height (Deck level) |
2" Minimum Maximum is dependent upon 3-point lift height. |
Horizontal cutting extension | 32" |
Maximum horizontal reach from center of tractor | 13'-2" |
Deck rotation | 85o up, 95o down |
Blade tip speed | 15,600 FPM |
Number of blades & size | 2, 1/2" x 4" |
Blade rotation | Clockwise |
Blade bolt | 1 1/2" With keyway, harden flat washer, and locknut |
Dishpan | 3/16" X 21" Round, dish-shaped |
Cutting capacity | 1" Max. |
Deck thickness | 10 GA |
Side skirt thickness | 3/16" |
Speed Increaser fluid capacity | NOTE: Refer to metal tag on speed increaser for vendor name (BIMA or Comer). Tractor mount, refer to Figure 6-4 on page 42. BIMA = 1 1/2 pints Comer = 2 pints Ditch Bank mount, refer to Figure 6-5 on page 42. BIMA = 2 pints Comer = 1 pint |
Speed increaser fluid | 80-90W EP Gearlube |
Hydraulic fluid | Mobilfluid 424 For alternate fluids, search on the web for "Mobilfluid 424" or go to www.mobil.com |
Reservoir capacity and filter | 35 Gallons / conventional 10 micron filter |
Method to check oil capacity | Dipstick |
Hydraulic fluid flow rate | 15 gpm (approx.) |
Overload protection | Hydraulic relief valve |
Driveline (optional) | ASAE category 4 |
Skid shoes | 2 1/2" Wide x 1/4" thick & replaceable |
Gauge wheel (optional) | 4 x 8 Laminated tire with greasable caged roller bearings. |
Gauge wheel adjustment | Manual |
SMV Sign (Accessory) | SMV decal on galvanized steel back sign and plated or galvanized blade mount. |