Land Pride WC1503 » Roeder Implement Inc., Iowa

Double tap to zoom



Features Benefits
Quick Hitch Adaptable Quickly and easily attach chipper to tractor with one person.
1/4" Thick Cutting Knife Rotor features 2 replaceable 1/4" hardened steel cutting edges
Knives Can Be Rotated When One Cutting Edge Is Worn Each knife has two cutting edges to extend knife life. When one edge is worn, rotate knife 180° to a new cutting edge. Less downtime required to sharpen knives
Knives Are Replaceable Can replace knives when all cutting edges are worn out.
Two V-Belts Designed to handle shock loads.
Spring Loaded Adjustable Idler Allows for constant and proper tension on belt.
2-Bolt Flanged Bearings Improves bearing life.
Cat. ll Shear-Bolt Driveline Shear-bolt protects the unit when obstructions are encountered.
Skid Extension Supports Allows the unit to sit on the ground while keeping the driveline near level. Extends life of driveline u-joints
Adjustable Rotating Discharge Chute With Rotation Stops Directs direction wood chips will be discharged. Chute rotate stops keep the chute from discharging chips toward the operator feeding product toward the feed chute.
Adjustable Deflector Chute Helps control the distance wood chips will be discharged away from the Wood Chipper
9,090 FPM Knife Speed For cleaner cut and better discharge of wood chips.
Self-Feeding System Product is pulled in by the sharp cutting knives with each pass of a knife. Operator can be retrieving the next object to load while the unit is chipping the last limb loaded into the feed chute.


Model WC1503
HP Required 12 to 30 HP (Minimum 25 HP for maximum capacity)
Weight 369 lbs.
Hitch Cat.1 w/ Quick Hitch capabilities
Upper Hitch Plate Thickness 1/4"
Main Frame Thickness 3/16"
Rotor Housing Thickness 3/16"
PTO Speed 540 RPM
Driveline Category Cat. 2 with shear bolt
Main Drive Pulley Diameter 16.35"
Rotor Pulley Diameter 4.5"
Belts 2 single B section
Belt Tensioners Spring loaded with adjustment
Rotor Size 17.5"
Rotor Speed 1984 RPM
Chip Capacity 3"
Hopper Inlet Opening 14"x 15"
Chipper Inlet Opening 6" x 3"
Spout Discharge Opening 3 1/4" Square
Cutting Knife Reversible and Replaceable
Number of Knives 2
Knife Size 2.5" x 2" x 1/4"
Knife Material Hardened Steel (Specifically designed for chipping)
Feed System Self-feed
Chip Chute Position 270 degrees
Feed Height Above Ground 35" (Without adjustable skids)
Feed Height Adjustment 6 Settings (Includes without adjustable skids)
Color Orange, Green & Beige