- Home
- Used Equipment
- New Equipment
- New Products
- Precision Farming
- Departments
- Company Profile
- Online Parts
Land Pride PD10
Double tap to zoom
PD10 Series Post Hole Diggers PD10
Overview:
The PD10 Series Post Hole Digger is just right for Category 1 three-point attachment for subcompact utility tractors. This unit offers a 30" auger length and a choice of 6", 9", & 12" auger flights with cast steel fishtail tips for quick piloting and faster hole starting. Homeowners, landscapers, and rental yards will find this unit very effective for occasional duty and for working and maneuvering in tight spots. - Less
The PD10 Series Post Hole Digger is just right for Category 1 three-point attachment for subcompact utility tractors. This unit offers a 30" auger length and a choice of 6", 9", & 12" auger flights with cast steel fishtail tips for quick piloting and faster hole starting. Homeowners, landscapers, and rental yards will ... + Read More
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Share This Product:
Features
FEATURES | BENEFITS |
Shorter yoke and boom tubing | Allows Post Hole Digger to be used on sub compact utility tractors (i.e. BX Kubota). |
2 7/8" Yoke | 3/16” Wall thickness for strength. |
Auger length | 30” Auger. |
Auger flighting | 1/4” Flighting, Semi-double flight. |
Replaceable hardened steel points on auger |
Hardened points will last longer than non-hardened. Points can easily be replaced when worn or damaged. Cast steel auger fishtail tips. |
Gearbox HP rating | 15 to 30 Horsepower. |
2" Output shaft | 2” tackles the torque loads that can be transmitted from hard ground. Fairly standard size for the industry, fits many competitive augers. |
Large selection of augers | Variety of Dirt Auger sizes and styles to suit many applications. |
Down pressure kit (optional) | Allows additional force to be supplied, hydraulically, to the beam to help force digger into the ground. |
Alignment handle (optional) | Helps guide the auger from the tractor seat. |
Post Hole Digger stand (optional) |
Bracket mounted to bottom of gearbox can incorporate a Post Hole digger stand . This allows operator to hook up and unhook from tractor more safely. Stand supports unit and will store unit when it is not on the tractor. |
Specifications
Model | PD10 |
Tractor HP Range | 15 to 30 HP |
Weight Without Auger | 120 lbs |
Auger Length | 30" |
Auger Flight Thickness | 1/4" |
Auger Pipe | 2 1/2" ID |
Auger Teeth | Forged, Individually Replaceable; 40 Degree angle installed on flat side; 50 Degree angle installed on angled side |
Number of Teeth | 6" - 2 teeth; 9" & 12" - 4 teeth |
Pilot | Cast Steel, 3 Drill points |
Driveline | Cat. II Shearbolt |
Maximum Operating PTO Speed | 300 RPM |
Gearbox | 1 3/8" 6B spline input shaft, 3:1 Ratio |
Gearbox Oil Capacity & Type | 3.4 Pints of SAE80-90W EP oil |
Output Shaft | 2 O.D. Round |
3-Point Hitch Cat. | Cat. I |
Boom | 2 7/8" O.D. |
Yoke | 2 7/8" O.D. |
Options and Accessories | |
Auger Extensions (Accessory | 7" & 14" Extensions Available |
Dirt Auger Sizes (Option) | 6", 9", or 12" |
Bolt-on Rock Head (Accessory) | Not Available |
Rock Auger Sizes (Option) | Not Available |
Cat. III Torque Limiter Driveline | Not Available |
Hydraulic Down Pressure Kit | Available |
Storage Stand | Available |
© 2012 - 2024 All Rights Reserved. Site by: AM EquipmentLocator.com