H&S 2108

Double tap to zoom

High Clearance Action Rakes features a “KWIK PIK” (patent pending) system for immediate clearance of windrows when raised, as well as greater clearance in the raking position and stability during transport.
An Adjustable Hitch allows you to level the rake for efficient raking.
Right and left side raking is done easily by turning either one of the wing transport valves off.
A 49″ Center Kicker Wheel is optional on all Action Rakes.
The hitch jack is used to adjust the windrow width as shown.
Raking width is easily adjusted by a single pin & clip, and can be fine-tuned with the threaded turnbuckle screw.
The operator can adjust the fine tune spring to allow proper rake wheel down pressure on each arm of either rake.

2108
NUMBER OF RAKE WHEELS	8
WHEEL DIAMETER	60″
TEETH PER WHEEL	40
TOOTH DIAMETER	7.5mm
RAKE WHEEL HUBS	Tapered Bearings
TRANSPORT WIDTH	10′
TRANSPORT LENGTH	17′
TRANSPORT HEIGHT IN TRANSPORT POSITION	86″
RAKING WIDTH	15′ - 19′
WINDROW WIDTH ADJUSTMENT	3′ - 5′
NO. OF RAKING POSITIONS W/TRANSPORT POSITION	6
GROUND PRESSURE RAKE WHEEL ADJUSTMENT	Adjustable Tension Spring
ACTION CYLINDER - RAISE/LOWER	4 ½″
WING CYLINDERS	2″
JACK	Standard
WEIGHT	1,400#
CENTER KICKER WHEEL	N/A