Case 590 Super N » Roeder Implement Inc., Iowa

Case 590 Super N

Double tap to zoom



Purpose-Built Performance 

Our strongest backhoe loader is all about productive power. With the push of a button, PowerBoost gives a temporary surge of hydraulic digging power. The PowerDrive transmission features seamless, automatic drive engagement for greater speed and gradeability under load, and PowerLift provides steady strength when craning. A universal hydraulic quick coupler works with most backhoe attachments and a factory-fit hydraulic thumb is also available for added utility.

For trenching or precision applications, standard ProControl helps stop the arm where you want without excess rebound. With loader work, several options work together to help save time and reduce spillage; Comfort Steer cuts lock-to-lock turns in half, adjustable Auto-Ride Control reduces load shock at speeds you set and our exclusive over-center design helps minimize "porposing" during road travel.

Common-Sense Fuel Efficiency 

Simply put, SCR (Selective Catalytic Reduction) means power. As an after-treatment Tier 4 Final solution, it provides compliance and fuel savings without sacrificing engine performance with no regeneration downtime or extra fuel burn, which is what you want with higher-horsepower backhoes. The 590 Super N also comes standard with fuel-efficient ECO Modes for both loader and backhoe, as well as adjustable engine Auto-Idle and Auto-Off settings.

CASE Comfort & Visibility 

The 590SN offers a premium, multi-colored air-ride seat with lumbar support and heat, as well as a Bluetooth radio with USB to keep operators comfortably productive. Backhoe controls are available as classic foot swing controls, dual-lever mechanical controls or pilot controls, which can be adjusted independent of the wrist rests. Loader controls put important functions at your fingertips like a rocker FNR switch, which lets you shift directions while keeping a hand on the steering wheel. A low-profile hood and floor-to-ceiling glass with opening rear-quarter panels (w/cabs) provide excellent visibility to buckets and around the machine, and optional LED lights provide more illumination with less power drain.

Simple Serviceability 

We've made it easy to keep our most powerful backhoe running at peak performance. You can quickly check or fill engine oil, transmission fluid or coolant, and fill up the fuel and DEF tank, all from the ground. The brakes can be serviced without complete axle disassembly and externally adjustable Extendahoe® wear pads allow you to tighten tolerances on-site with simple tools. Plus, with the SCR solution, there's no particulate filter to maintain or replace. And for added security and convenience, all N Series backhoes come with a battery disconnect switch and jumpstart terminal.



  • ROPS/FOPS certified protective canopy
  • Anti-vandalism cover for dash – w/ canopy only
  • Rear fenders extensions
  • Coat hook w/ garment strap
  • Interior rearview mirror, convex 3.54 in (90 mm) wide x 10.83 in (275 mm) high
  • Non-suspension seat – 180° swivel – Vinyl
  • 2 in (50 mm) retractable seat belt
  • Cup holder/storage tray mounted on left-hand fender
  • Right-hand storage compartment w/ lid



  • FPT F5BFL413A diesel
  • Diesel Oxidation Catalyst with SCR
  • Full flow engine oil filter
  • Air cleaner – replaceable dry type with radial seal
  • Aspirated air cleaner
  • Fuel filter with water trap
  • Radiator with de-aeration bottle
  • Antifreeze to -34° F (-37° C)
  • Electronic throttles – foot and rotary hand
  • Self-adjusting belt
  • High Pressure Common Rail computer controlled injection with diagnostic features



  • Powershift S-Type transmission, 4F-3R fully synchronized electronic transmission controller and kick down in loader control lever – 2WD or 4WD
  • Front axle: 4WD heavy-duty mechanically driven front axle with 14.0 x 17.5 tires, limited slip differential and drive shaft guard
  • Rear axle: 4WD heavy-duty outboard planetary drive with 21.0 x 24.0 tires
  • Torque converter – 12 in (305 mm)
  • On-the-go electric 4WD control
  • Electric F/R shuttle control
  • Electric differential lock control, push-button
  • Park brake, spring-applied, hydraulic release – SAHR



  • Ground level remote hydraulic test ports
  • Pump 43 gpm @ 3,000 psi (162.6 L/min @ 207 bar)
  • Heavy-duty oil cooler
  • 7-micron, spin on oil filter



  • Bucket position indicator
  • Lifting lugs on standard bucket
  • Single-lever control w/ self-leveling and return-to-dig
  • Hand operated clutch disconnects on loader and shift levers, single lever 4-function loader control: lift, dump, clutch cut-out, differential lock.



  • Over center design, Fabricated “S” boom
  • Pro Control System
  • Dipperstick integrated serrated gripper teeth
  • Case mechanical coupler



  • Forward tilt engine hood
  • Replaceable, molded front bumpers
  • Front/Rear tie downs
  • Reflective logos
  • Lights – cab and canopy:
  • 2 front driving
  • 2 rear tail/stop
  • 2 front flashers/turn
  • 2 rear flashers/turn
  • Lights – cab only: Adjustable halogen work lights – 55 W: 2 front, 2 side – left and right, 4 rear
  • Lights – canopy only: Adjustable halogen work lights – 55 W: 2 side – left and right, 2 rear