Double tap to zoom

 

Features

Skip Fabrications

All skips are fabricated with thick steel side walls and heavy duty steel front and basse plates. Additionally, the reinforced box section design is structured around the edges of the skip offering high levels of protection from excavator bucket collision.

 

Centre Articulation

All dumpers utilise single heavy duty centre pivot pin and a single steering ram connecting the chassis sections. This design provides large articulation and oscillation angles for tighter turning and sustained ground contact.

 

Articulation Lock

An articulation lock is supplied as standard for locking the two chassis in the forward position for transport and maintenance.

 

Chassis Fabrications

Throughout the range heavy duty fabrications are specified to ensure all Terex dumpers can withstand the most difficult conditions and enthusiastic operators.

 

Folding ROPS

Folding Roll Over Protection Structure or ROPS are fitted as standard to all site dumpers, whilst fixed versions are available on certain models.

 

Road Lights

Front and rear road lights are available as an option and are fitted with extra heavy duty guards to protect against dirt and damage.


Ground Clearance

All Terex site dumpers are designed to work on all types of terrain, high ground clearance across the range and permanent 4WD means they get where other vehicles can't.

 

Instrumentation and Controls

Keeping instrumentation easy to read, intuitive to operate and simple to service is a fundamental part of the Rental Tough offering from Terex.

Specifications

PERFORMANCE  
MODEL TA2SH
Payload (Kg) 2000
Unladen Weight (Kg) 2082
Tipping Type Swivel Tip
Skip Capacity - Water (litres) 750
Skip Capacity - Struck (litres) 1000
Skip Capacity - Heaped (litres) 1200
Engine Kubota D1703M
- Number of Cylinders 3
- Gross Power - kW (hp) 24.5 (32.6)
- Displacement (cc) 1647
- Maximum Torque (Nm) 105
- Aspiration Naturally Aspirated
- Emission Compliance EU Stage 3A
TRANSMISSION/DRIVE  
Transmission Type Hydrostatic Motor via Transfer Box to Front & Rear Axles
Tyre Size 10.0 / 75 x 15.3 (10 ply)
Drive 2 / 2 (High & Low Range - Forward & Reverse) Hydrostatic - Permanent 4WD
Maximum Travel Speed - mph (kph) 10.0 (16.0)
Gradeability (Maximum Slope Gradient) 19.5% (1 in 5)
CAPACITIES  
Fuel Tank Capacity (litres) 23
Hydraulic Tank Capacity (litres) 25
ENVIRONMENTAL  
Noise Emission (to ISO 4871) - Sound Pressure (LpAd) 86.1 dB
Sound Power Level (LWAd) 101 dB
Noise Compliance Noise - Equipment Used Outdoors Directive 2000/14/EC
Vibration - Hand Arm (as defined in EN474-1 all operations) <2.5 m/s2
Vibration - Whole Body (as defined in ISO/TR 25398 - Work Cycle) 0.529 rms (0.264 m/s2 Uncertainty)
HYDRAULIC SYSTEM  
Pump Type Gear
Flow Rate 21 l/min
Operating Pressure 210 bar
Steering System Orbitrol hydrostatic steering unit powering central hydraulic steering ram