• AVAILABLE WITH DUAL 140 BU AND 180 BU POLYMER TANKS*
• STAINLESS STEEL INNER TANK COMPONENTS, AIR LINES AND METERING SYSTEM
• GROUND DRIVE OR HYDRAULIC VARIABLE RATE 10-OUTLET METERING (DOES NOT INCLUDE 2 1/2" AIR LINES TO TOOLBAR) WITH PLASTIC PEGGED ROLLERS
• 17" S3 HYDRAULIC FAN (REQUIRES 21 GPM @ 3000 PSI) WITH AIR MANIFOLD DAMPER 
• DOUBLE SHOOT WITH AIR STREAM SWITCH BOX ON REAR TANK
• REAR HYDRAULIC 3-POINT HITCH WITH 12,000 LBS LIFT CAPACITY** (18 INCHES FROM LIFT EYE) ON AC2280 TOW-BETWEEN MODEL ONLY
• 3 SETS OF 1/2" HYDRAULIC LINES TO REAR 3-POINT HITCH FOR TOOLBAR
• DRAWBAR ADAPTOR AVAILABLE FOR 3-POINT HITCH FROM DRAWN IMPLEMENTS***
• MOUNTED LOADING AUGER
• STANDARD 710/70R42 TRACTOR LUG TIRES ON 10-BOLT HUBS (TIRE DEDUCT AVAILABLE) 22.5 X 16.1 TIRES STANDARD ON TOW-BEHIND FRONT AXLE
• ASSEMBLED AS TRUCKING WIDTH PERMITS
• Bushel capacity is calculated by volume; actual capacity may vary by commodity type

** Total lift capacity diminishes as the implement center of gravity moves further from the hitch.  Lift capacity is also determined by the cart and the remaining carrying capacity of the tires installed.  Front ballast weights may be required to avoid negative tongue weight and safely operate 3-point hitch tools.  Front ballast weights are needed when the implement weight is over 3,900 lbs or beyond 18" from the lift-eyes.

***Trailing implement horsepower requirement should not exceed 500 hp.

IDEAL FOR NUTRIENT APPLICATION - APPLY RIGHT NUTRIENTS AT RIGHT RATE, RIGHT PLACE AND RIGHT TIME.

• 280 BUSHEL (140 + 140) TOW-BEHIND POLY TANK CART WITH HYDRAULIC VARIABLE RATE METERING
• 10-outlet Ground Driven Metering System w/Dickey-John Hydra-Drives
• 2 x 140-bushel poly tanks with stainless internal components
• 17" S3 hydraulic fan (Requires 17 GPM @ 3000 psi)
• 8" x 18' hydraulic loading auger on a manual swing arm
• 710/70R42 Rear Tires on 10-bolt rims; 22.5 x 16.1 Front Tires

ADDITIONAL INFORMATION

• TRANSPORT WIDTH
• TRANSPORT HEIGHT (140 + 140)
• TRANSPORT HEIGHT (180 + 180)

OTHER OPTIONS

• DRAWBAR HITCH ADAPTOR FOR 3-POINT HITCH
• UPGRADE TO CAT 4 DRAWBAR HITCH
• REAR TIRE AND RIM DEDUCT
• 8" AUGER DEDUCT
• 10" AUGER DEDUCT
• LOW OUTPUT PLASTIC PEGGED METER ROLL IN LIEU OF STANDARD
• HIGH OUTPUT STAINLESS STEEL METER ROLL IN LIEU OF STANDARD