Land Pride RC6610 » Roeder Implement Inc., Iowa

Double tap to zoom

 

Features

Features Benefits
Surpassed rugged industry
standards
All Land Pride Cutters have been designed and tested to meet rigorous voluntary test procedures according to ISO 4254-13.
Factory assembled Saves customer set-up time and money.
7 Year gearbox warranty* Shows confidence in gearbox integrity. (Years 6 & 7, parts only.)
Rugged heavy built gearboxes Capable of handling heavy cutting applications.
Gearbox Seal Protection Gearbox bottom seal protection for longer bearing life.
2 3/8" Output gearbox shaft Large output shaft handles shock loads better.
2 Piece shield on wing gearboxes Driveline grease zerks are easier to access.
Self-leveling hitch Reduces drawbar wear by keeping hitch level while going through ditches.
Low hitch weight on tractor tongue Ideal for smaller HP tractors by reducing the amount of weight on the drawbar.
Narrow A-frame hitch Allows for a tighter turning radius.
Adjustable park jack angle Park jack can be adjusted to be perpendicular to the ground.
Adjustable driveline hanger Serves as a support rest for the driveline when the cutter is unhooked from the tractor. Assist operator when attaching driveline to tractor PTO shaft.
Input driveline:
Cat. 6 CV or Cat. 5 Conventional
Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint
allows for 80 degree turns without doing damage to the driveline.
Cat. 5 intermediate & Cat. 4 wing
drivelines with slip-clutches
Driveline is sized right for the intended cutting capacity. Slip-clutch will slip under load
instead of twisting the driveline.
Grease zerks on end caps of driveline cross journals Intermediate and wing driveline cross journals are easier to grease. All drivelines have access holes for greasing U-joints and inner profiles.
High blade tip speed Allows clean cutting of material and even distribution.
6" Blade overlap Eliminates skipping during turns.
High cutting capacity  56 Series
                                   66 Series
Can cut brushy areas with saplings up to 4".
Can cut brushy areas with saplings up to 4 1/2".
12" Deck height Handles heavy cutting, which reduces balling-up of cut material under the deck.
3/16" Stump jumper backed with a
1" thick mounting bar
Heavy round stump jumper with bottom gearbox seal protector. Can hold up to tough
conditions.
Pre-cut chamber Allows grass and vegetation to stand back up prior to cutting for a more complete cut.
Reinforced leading edge Front of deck can withstand heavy brush and saplings.
Collapsible leveling rods Prevents damage and failure to leveling rods.
1" Leveling rods Large diameter leveling rods provide superior supporting strength over rough terrain.
10 Gauge smooth deck top Reduces accumulation of debris and is easier and faster to clean.
7 Gauge smooth deck bottom Heavy deck design holds up to harsh conditions. No bottom obstructions.
Replaceable 1/4" side skirt Reduces debris piercing possibilities. Can be replaced if damaged.
Beveled skid shoes on wing deck Reduces gouging the ground when turning.
Hinged wing section Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and
hollows can cause uneven cutting.
1" Solid hinge rods Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in
the hinge area itself.
Wing transport lock pin Holds transport wing in the folded-up position in case of hydraulic pressure loss.
Enclosed front to rear dual leveling
rods
Dual leveling rods enable the cutter to pull equally on the rear axle during travel over
rough terrain. Many competitors only use one leveling rod.
5-Bolt hubs 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Drain holes in wheel rims Allows water to drain from wheels mounted on folded-up wing.
Helps prevent paint deterioration and rusting to the wheel rims.
Spring-cushioned trailing arms Provides independent suspension, cushions loads on drawbar.
Replaceable wheel spindles Wheel spindles can be replaced when damaged without replacing the entire axle.
Simply remove one bolt to replace damaged spindle.
Bar-tite hitch Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Wheel options Laminated tires: Eliminates flats.
Airplane tires without foam filling: Give better cushion while transporting.
Airplane tires with foam filling: Give better cushion while transporting and can’t go
flat.
LP Performance hitch option Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.
Bar-tite hitch option Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Deck rings (optional) 1/2" x 3" full welded deck ring keeps blades from damaging the deck.
Roadway light kit option Allows operator to transport on public roads safer when head lights are turned on and/or when flasher lights are turned on.

Specifications

Model Number RC6610 & RCM6610
Horsepower Range 50 to 250
Gearbox Horsepower 250 hp Splitter
210 hp Center & Wing
(Blade spindle gearboxes are built heavier)
Gearbox Lubrication Gear Lube 80-90W EP
Gearbox Oil Capacity 5.5 Pints: Divider Gearbox
10 Pints: Center deck & RH deck spindle gearboxes
Cutting Capacity 4 1/2"
Tongue Weight 2,060 lbs.
Machine Weight Single row chain guards, 6 aircraft wheels, 540 CV main driveline & standard clevis hitch
5,292 lbs.
Blade Tip Speed
AT 540 rpm
AT 1000 rpm
 
Center Blades = 16,300 FPM Wing Blades = 16,300 FPM
Center Blades = 16,300 FPM Wing Blades = 16,000 FPM
Hitch Types Optional Self-Leveling Clevis Hitch, LP Performance Hitch,
Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
Hitch Jack Standard (7,000 lbs.)
Signal lights
7 Pin connector
LED
SAE J560 pin configuration
Wing Offset Right wing model with weight box on left side
Cutting Width
Overall Width
Minimum Transport Width
10' - 6"
11' - 7"
7'-5 1/2" With transport lock & deflectors removed and hydraulic cylinders fully retracted
Overall Length 16' - 0"
Deck Height 12"
Cutting Height 2" to 14"
Lift Hydraulics 3 1/2" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
Wing Hydraulics 3" x 8" hydraulic cylinder, hose & fittings
Wing Transport Protection Wing transport lock pin
Deck Material 10 gauge top deck and 7 gauge bottom deck
Side Skirt Material Bolt-on replaceable 1/4" steel
Skid Shoes Center Deck: AR400 2 Replaceable skid shoes only
Weight Box: Reversible & replaceable skid shoe
Wing: 2 Replaceable parts: Standard straight skid shoe with hardened leading skid shoe.
Blades - 4 (2 per Carrier) 1/2" x 4" Heat treated free swinging alloy steel with up lift
Blade Overlap 6"
Blade Bolt Keyed with hardened flat washer & locknut
Stump Jumper / Blade Holder 3/16" Thick round dish-shaped pan, reinforced
with 1" x 5" blade bar; or optional Shredder Kit
Deck Ring Optional 1/2" x 3" fully welded
Front & Rear Guards Optional rubber, single chain, double chain, or double chain with cable
Input Driveline 540 & 1000 rpm Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint
Intermediate Driveline Category 5 star profile with slip-clutch
Wing Driveline Category 5 star profile with slip-clutch
Wheel Options 6" x 21" Laminated tires, 25.5" new tire with or without foam fill,
29" x 16 ply used aircraft tires without foam filling.
Number of Wheels 5 - Wheel option: 4 on transport axle and one on wing axle
6 - Wheel option: 4 on transport axle and two on wing axle
Transport Axle Spring-cushioned on trailing arms
Hubs Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts