H&S Hay Machine II » Roeder Implement Inc., Iowa

H&S Hay Machine II

Double tap to zoom

 

Features

  • The H&S Haymachine II is the easiest machine to use to effectively reduce drying time of hay with the least amount of handling, and as a result, to increase considerably the nutrient value of your hay crop.
  • The Haymachine II moves and turns over the windrow off the wet ground onto dry ground and at the same time, tedding the windrow into a fluffy windrow to dry fast.
  • A 12″ gauge wheel on the front of the rake beam provides for proper rake tooth ground pressure. No adjustment needed.
  • Each rake wheel is mounted independently allowing them to better follow the contours of the ground.
  • A hand crank adjusts the tedder reel height.
  • A cam lever is used to adjust the aggressiveness of the tedder teeth for a fluffier windrow.
  • The speed of the hydraulically driven tedder reel is controlled by manually adjusting the control valve for crop and field conditions.
  • The easy tongue adjustment system is used to give the operator different offset positions for tedding and a position for storage.
  • The hydraulic cylinder stops can be adjusted to limit the distance that the rake wheel arm swings out.
  • An optional 4th raking wheel increases the raking width from 4 ½′ to 6′ for your extra wide windrows.

Specifications

TEDDING WIDTH 7′
OVERALL WIDTH TRANSPORT POSITION 127"
WEIGHT 1,680 lbs.
NUMBER OF TEETH, RUBBER MTD. 56
OVERALL LENGTH WITH HITCH 146″
WHEELS 4 Bolt, 15″ x 5″ with 15″ Tires
DRIVE Hydraulic Drive on Tedder Reel