Land Pride RTR0542 » Roeder Implement Inc., Iowa

Double tap to zoom

 

Features

FEATURES BENEFITS
American made Many tillers are imported. American made means better parts availability.
Reverse tilling action Reverse action ‘sucks’ tiller into ground, does not walk on top of hard ground like forward rotation tillers can.
Tractor horsepower range 17-26 hp
Working widths 42" and 50" to meet specific customer needs.
5” Digging depth For deep soil penetration.
Clevis lower hitch Provides additional strength and easy one person hook-up.
Fits Land Pride Quick-Hitch Allows for quick and easy one person hook-up. Additional PTO driveline may be required.
Adjustable parking stand Allows for easy hook-up and storage.
Adjustable skid shoes Control depth with seven adjustments.
Formed rear deflector Keeps dirt in and leaves a level finish. Forming gives deflector additional strength. Adjustable deflector allows for various finish results.
Front deflector Front deflector is flexible to take the beating from rocks or debris.
4 “C” shaped heat-treated tines per flange ‘C’ Shaped tines require less HP to move through the ground.
Solid rotor shaft 1 3/4” Solid steel rotor shaft for strength.
13” Rotor swing diameter For deep tilling and turning the soil over faster.
Double lip seal on rotor bearing Double lip seal helps keep the dirt out and the grease in.
Fully shielded shear pin or slip-clutch driveline Protects the gearbox and rotor shaft upon hitting obstructions. Slip-clutch saves having to replace shear-pins.
#80 Drive chain enclosed in oil bath Heavy drive chain stretches less, and oil bath keeps wear to a minimum.
Stamped chain cover Stamped forming gives the chain cover strength.

Specifications

Model Number RTR0542
Recommended tractor power take-off
horsepower
Up to 26 hp (Subcompact Tractors)
Weight 268#
Tilling width 42"
Overall width 46 1/2"
Hitch type Category I
Fits Land Pride’s Category I Quick Hitch
Offset capabilities No
Number of flanges 6
Number of tines per flange 4
Tine construction Alloy steel heat treated “C” shaped blades
Skid shoes Adjustable
Storage stands Adjustable
Rear deflector Adjustable
Driveline Category II
Off-Center Shear-bolt - standard
Slip-Clutch - optional
Gear box 26 hp input at 540rpm 1.46:1 ratio
Cast iron housing, straight bevel gears
Gearbox lubrication & oil capacity 1 Pint of SAE 80-90W EP oil
Drive chain #80 Roller chain - Fully enclosed in oil bath with drain & fill plugs
Drive chain lubrication Shell Gadus S2 V2200 00 flowable grease or equivalent
Land Pride Part #821-045C (32 oz. bottle)
Sprockets Case hardened teeth, splined bores
Rotor swing diameter 13"
Rotor shaft speed 230 rpm at 540 rpm power take-off speed