H&S 3108

Double tap to zoom

High Clearance Action Rakes features a “KWIK PIK” (patent pending) system for immediate clearance of windrows when raised, as well as greater clearance in the raking position and stability during transport.
An Adjustable Hitch allows you to level the rake for efficient raking.
Right and left side raking is done easily by turning either one of the wing transport valves off.
A 49″ Center Kicker Wheel is optional on all Action Rakes.
The hitch jack is used to adjust the windrow width as shown.
Raking width is easily adjusted by a single pin & clip, and can be fine-tuned with the threaded turnbuckle screw.
The spring suspension system allows each rake wheel to float independently over the ground. The down pressure for ALL the wheels on each side is done by a single a single hand crank.

3108
NUMBER OF WHEELS	8
WHEEL DIAMETER	60″
TEETH PER WHEEL	40
TOOTH DIAMETER	7.5mm
RAKE WHEEL HUBS	Tapered Bearings
TRANSPORT WIDTH	10′
TRANSPORT LENGTH	19′
TRANSPORT HEIGHT IN TRANSPORT POSITION	86″
RAKING WIDTH	15′ - 19′
WINDROW WIDTH ADJUSTMENT	3′ - 5′
NO. OF RAKING POSITIONS	6
GROUND PRESSURE RAKE WHEEL ADJUSTMENT	Independent wheel flotation with single side adjustment crank
ACTION CYLINDER - RAISE/LOWER	4 ½″
WING CYLINDERS	2″
JACK	Standard
WEIGHT	1,800#
CENTER KICKER WHEEL	Optional
TRANSPORT WHEELS	(2) - ST205/75D15
ADJUSTABLE BALL HITCH	Optional