H&S Model HPV4155

Double tap to zoom

 

Features

  • Both sizes are available with a choice of horizontal or vertical beaters.
  • Vertical beaters feature “REVERSE FLIGHTING” on the top 21″ of the beater flighting. This patented feature allows for an even spread pattern of material.
  • All Hydraulic Push models use solid virgin grade poly with UV inhibitor, for the floor and sides allowing less friction.
  • The hydraulic endgate has 2 cylinders with ⅜″ hose and pipe for faster operation in cold weather.
  • Horizontal beater models feature a top beater as standard equipment.
  • Heavy duty rectangular tubing is used for the pole to ensure strength and long life. Structural channel floor supports spaced 9 ½″ apart are used for maximum floor support.
  • The HP’s PTO beater drive system is driven by the unique center drive system that consists of a straight shaft off the PTO underneath the manure spreader to an angle gearbox in the rear, and over to the beater drive sprocket.
  • #80 chains are used for strength and long life and easy open shields makes lubrication easy.
  • The Hydraulic Push-Off System on all models features two hydraulic cylinders that sequence to reduce push-off forces for fast unloading of material.
  • Beater blades are replaceable and the beater assembly is removable for stockpiling manure.
  • Removal of either beater assembly is done by simply removing the mounting bolts, a drive chain and disconnecting the auto-oiler hose on the vertical beater model.
  • Beater gearboxes are safely mounted on the top side of the vertical beaters rather than the bottom to avoid being destroyed by foreign objects.
  • An Auto-oiler for the vertical beater drive chains is standard equipment.
  • The vertical beater features a quick release clean out pan.

Specifications

MODEL HPV4155
CAPACITY - OLD RATING 550 Bushel
CAPACITY CU. FT, STRUCK LEVEL 430
SIDE LOADING HEIGHT 81″
2ND OR VERTICAL BEATER HEIGHT 121 ½″
HEIGHT-TOP OF HYD. END GATE (W/O HOOK) 85 ½″
HEIGHT-TOP OF SCREEN (VERT. BEATER ONLY) 117″
INSIDE WIDTH 72″
INSIDE LENGTH 16′
INSIDE DEPTH 53″
OVERALL WIDTH W/TIRES 10′ 2″
OVERALL LENGTH 27′ 5″
STANDARD NUMBER OF BEATERS 2
HORIZONTAL BEATER DIAMETER/LOWER N/A
HORIZONTAL BEATER DIAMETER/UPPER N/A
VERTICAL BEATER DIAMETER 34″
REPLACEABLE BEATER PADDLES YES
REMOVEABLE BEATER ASSEMBLY YES
STANDARD PTO SPEED 1000 RPM
OPTIONAL PTO SPEED 540 RPM
PTO OVERLOAD PROTECTION Shear Bolt
HYDRAULIC PUSH CYLINDER DIAMETER 4 ½″
HYDRAULIC PUSH CYLINDER HOSE DIAMETER ½″
HUB 10 Bolt
SPINDLE SIZE 3″
TIRE SIZE 425 x 22.5
HYDRAULIC END GATE Standard
CYLINDERS ON HYDRAULIC END GATE 2 W-⅜″ Hose
REAR PAN Standard
JACK Standard
WOOD SIDE RAILS Standard
WEIGHT W/TIRES 11,000#