Power and Productivity

More than 39,000 pounds of drawbar pull in a machine that can easily be transported around — often without a permit. Three track configurations. Two track gauges. Four different blade sizes. Powerful hydrostatic performance. All providing operators with extreme power and flexibility in an easy to own and operate dozer.

Total Control for the Operator

The 650M allows operators to adjust shuttle (forward-to-reverse) and steering sensitivity to Smooth, Moderate or Aggressive to match conditions on the site. And an advanced load monitoring system automatically reduces track speed (increasing torque) with a heavier load on the blade, and increases track speed (reducing torque) with a lighter load on the blade, ensuring that the machine is working at optimal power and efficiency at all times.

Operator Comfort and Jobsite Visibility

CASE M Series dozers provide some of the industry’s best sight lines down to the blade, the tracks and the worksite with excellent visibility and lots of glass from floor to ceiling. A true positive-pressure cab with advanced sealing helps keep out dirt, dust and noise — creating a working environment with one of the industry’s lowest sound ratings. And an “isolated” design further reduces cab vibration and provides a smoother ride.

Ease of Maintenance and Service

The 650M features easy access and grouped service points, as well as a maintenance-free Tier 4 Final emissions solution that requires no diesel particulate filter, no regeneration and no fluids. The enhanced CASE SiteWatch™ telematics provides insight into machine performance, maintenance intervals and more — allowing you to stay ahead of service and achieve optimal uptime.

Protected by CASE ProCare

Each CASE M Series dozer provides peace of mind and controlled owning and operating expenses with ProCare: * Three-year, 3,000-hour full-machine factory warranty * Three-year, 2,000-hour planned maintenance contract * Three-year Advanced CASE SiteWatch™ telematics subscription

Operator Environment

• Optional ROPS cab
• Single lever control for speed, steering and direction
• Forward/reverse speed ratio selector
• Adjustable armrests
• Foot rests; Retractable seat belt, 2 in (51 mm)
• Rear view mirror
• Seat tilts for access
• Warning Lights: Air filter; Alternator; Engine oil pressure; Diagnostic fault indicator; Engine coolant; temperature; Engine oil pressure; Low fuel level; Park brake engaged; Service soon indicator; Transmission temperature; Hi range; Hydraulic filter; Transmission filter; Transmission pressure.
• Gauges: Battery voltage; Fuel level; Digital hourmeter/tachometer/diagnostics/service reminder; Transmission oil temperature; Water temperature.
• Audible warnings: Engine oil pressure; Transmission pressure; Engine coolant temperature; Low fuel level; Transmission charge pressure; Transmission/hydraulic temperature.

Engine

• FPT F5C F5HFL463D*G003
• Tier 4 Final Certified
• Dual DOC
• CEGR
• Automatic fan belt tensioner
• Integral engine oil cooling
• Fuel filter
• Dual element radial seal air cleaner
• 120 amp alternator
• 925 CCA 12-volt battery
• Engine side panel
• Anti-freeze to -34°F
• Pusher fan
• Radiator – Anti-sandblast

Drivetrain

• Dual path infinitely variable, single-lever controlled hydrostatic drive with electronic straight tracking & counter-rotation
• Final drive: Triple reduction; helical gear/planetary decelerator with hydrostatic drive retardation
• Decelerator with hydrostatic drive retardation
• Automatic spring-applied parking brake
• 10 incremental speed settings - Operator preference settings for max speed, shuttle sensitivity and steering sensitivity

Blade

• 52° – 60° variable pitch
• Single lever control for blade lift, angle and tilt
• 90 in (2.29 m) blade 650M LT
• 96 in (2.44 m) blade 650M LT/WT
• 109 in (2.8 m) blade 650M WT
• 120 in (3.0 m) blade 650M LGP

Undercarriage

• Hydraulic track adjusters
• Easy clean track covers
• Case sealed and lubricated track chain
• Permanently lubricated track and carrier rollers
• H.D. track covers
• Track adjuster guard
• Track gauge – 56 in or 68 in
• Track guides – front and rear
• Length of track on ground – 85 in
• High visibility track idler
• Heavy duty track frame, sprocket and mounting pads

Other

• Anti-vandalism package
• Backup alarm
• Hinged grill
• Decelerator
• Final drive seal guard
• Hand throttle
• Horn
• Work lights: 2 front/1 rear
• Master disconnect switch
• Mirror
• Operator’s manual enclosure
• O-ring face seal hydraulic fittings
• Pre-cleaner
• Vertical spin-on hydraulic/filters
• Hydraulics – 3 spool valve
• Fuse circuit protection
• Single key start switch
• Pre-wired for work lights
• Two additional power sources availabe for heater, air seat or auxiliary 12 volt power port
• Crankcase
• Transmission bottom
• CASE ProCare – 3-yr/3000-hr factory warranty, planned maintenance and SiteWatch™ Telematics

Telematics

• CASE SiteWatch™ Telematics – includes hardware and a 3-yr Advanced data subscription